(Absinth) (IPA English: ['æbs?n?] IPA French: [ap.s?~t]) is a distilled, highly alcoholic, anise-flavored spirit derived from herbs including the flowers and leaves of the medicinal plant Artemisia absinthium, also called grand wormwood. Although it is sometimes incorrectly called a liqueur, absinthe is not bottled with added sugar and is therefore classified as a liquor or spirit.
Absinthe is often referred to as la Fée Verte ('The Green Fairy') because of its coloring — typically pale or emerald green, but sometimes clear or in rare cases rose red. Due to its high proof and concentration of oils, absintheurs (absinthe drinkers) typically add three to five parts ice-cold water to a dose of absinthe, which causes the drink to turn cloudy (called 'louching'); often the water is used to dissolve added sugar to decrease bitterness. This preparation is considered an important part of the experience of drinking absinthe, so much so that it has become ritualized, complete with special slotted absinthe spoons and other accoutrements. Absinthe's flavor is similar to anise-flavored liqueurs, with a light bitterness and greater complexity imparted by multiple herbs.
Absinthe originated in Switzerland as an elixir but is better known for its popularity in late 19th and early 20th century France, particularly among Parisian artists and writers whose romantic associations with the drink still linger in popular culture. In its heyday, the most popular brand of absinthe worldwide was Pernod Fils. At the height of this popularity, absinthe was portrayed as a dangerously addictive, psychoactive drug; the chemical thujone was blamed for most of its deleterious effects. By 1915, it was banned in a number of European countries and the United States. Even though it was vilified, no evidence shows it to be any more dangerous than ordinary alcohol.[2] A modern absinthe revival began in the 1990s, as countries in the European Union began to reauthorize its manufacture and sale.
ETYMOLOGY
Look up absinthe in Wiktionary, the free dictionary.The French word absinthe can refer either to the liquor or to the actual wormwood plant (grande absinthe being Artemisia absinthium, and petite absinthe being Artemisia pontica). The word derives from the Latin absinthium, which is in turn a stylization of the Greek a (apsinthion). Some claim that the word means 'undrinkable' in Greek, but it may instead be linked to the Persian root spand or aspand, or the variant esfand, which may have been, rather, Peganum harmala, a variety of rue, another famously bitter herb. That this particular plant was commonly burned as a protective offering may suggest that its origins lie in the reconstructed Proto-Indo-European root *spend, meaning 'to perform a ritual' or 'make an offering'. Whether the word was a borrowing from Persian into Greek, or rather from a common ancestor, is unclear.
Absinth (without the 'e') is a spelling variation of absinthe often seen in central Europe. Because so many Bohemian-style products use it, many groups see it as synonymous with bohemian absinthe, even though that is not always the case.
PRODUCTION
Anise, one of the three main herbs used in production of absinthe
Grande Wormwood, one of the three main herbs used in production of absintheThe main herbs used are grande wormwood, florence fennel and green anise, often called the 'holy trinity'. Many other herbs may be used as well, such as hyssop, melissa, star anise and petite wormwood (Artemisia pontica or Roman wormwood). Various recipes also include angelica root, Sweet Flag, dittany leaves, coriander, veronica, juniper, nutmeg, and various mountain herbs.
The simple maceration of wormwood in alcohol without distillation produces an extremely bitter drink, due to the presence of the water-soluble absinthine, one of the most bitter substances known. Authentic recipes call for distillation after a primary maceration and before the secondary or 'coloring' maceration. The distillation of wormwood, anise, and Florence fennel first produces a colorless distillate that leaves the alembic at around 82% alcohol. It can be left clear, called a Blanche or la Bleue (used for bootleg Swiss absinthe), or the well-known green color of the beverage can be imparted either artificially or with chlorophyll by steeping petite wormwood, hyssop, and melissa in the liquid. After this process, the resulting product is reduced with water to the desired percentage of alcohol. Over time and exposure to light, the chlorophyll breaks down, changing the color from emerald green to yellow green to brown. Pre-ban and vintage absinthes are often of a distinct amber color as a result of this process.
Non-traditional varieties are made by cold-mixing herbs, essences or oils in alcohol, with the distillation process omitted. Often called 'oil mixes', these types of absinthe are not necessarily bad, though they are generally considered to be of lower quality than properly distilled absinthe and often carry a distinct bitter aftertaste.
Alcohol makes up the majority of the drink and its concentration is extremely high, between 45% and 89.9%,[4] though there is no historical evidence that any commercial vintage absinthe was higher than 74%. Given the high strength and low alcohol solubility of many of the herbal components, absinthe is usually not imbibed 'straight' but consumed after a fairly elaborate preparation ritual.
Historically, there were five grades of absinthe: ordinaire, demi-fine, fine, supérieure and Suisse (which does not denote origin), in order of increasing alcoholic strength and production quality. While a supérieure and Suisse would always be naturally colored and distilled; ordinaire and demi-fine could be artificially colored and made from oil extracts. These were only naming guidelines and not an industry standard. Most absinthes contain between 60% and 75% alcohol. It is said to improve materially with storage. In the late 19th century, cheap brands of absinthe were occasionally adulterated by profiteers with copper, zinc, indigo plant, or other dyes to impart the green color, and with antimony trichloride to produce or enhance the louche effect (see below). It is also thought that the use of cheaper industrial alcohol and poor distillation technique by the manufacturers of cheaper brands resulted in contamination with methanol, fusel alcohol, and similar unwanted distillates. This addition of toxic chemicals is quite likely to have contributed to absinthe's reputation as a hallucination-inducing or otherwise harmful beverage.
ABSINTHE KITS
There are numerous recipes for homemade absinthe floating around on the Internet, many of which revolve around soaking or mixing a kit or store-bought herbs and wormwood extract with high-proof liquor such as vodka or Everclear. Even though these do-it-yourself kits have gained in popularity, it is simply not possible to produce absinthe without distillation. Absinthe distillation, like the production of any fine liquor, is a science and an art in itself and requires expertise and care to properly manage.
Besides being unpleasant to drink [6] and not authentic distilled absinthe, these homemade concoctions can sometimes be poisonous. Many of these recipes call for the usage of liberal amounts of wormwood extract or essence of wormwood in the hopes of increasing the believed psychoactive effects. Consuming essential oils will not only fail to produce a high, but can be very dangerous. Wormwood extract can cause renal failure and death due to excessive amounts of thujone, which in large quantities acts as a convulsive neurotoxin. Essential oil of wormwood should never be consumed straight.
PREPARATION
Preparing absinthe the traditional way. Traditionally, absinthe is poured into a glass over which a specially designed slotted spoon is placed. A sugar cube is then deposited in the bowl of the spoon. Ice-cold water is poured or dripped over the sugar until the drink is diluted 3:1 to 5:1. During this process, the components that are not soluble in water, mainly those from anise, fennel and star anise, come out of solution and cloud the drink; the resulting milky opalescence is called the louche (Fr. 'opaque' or 'shady', IPA [lu?]). The addition of water is important, causing the herbs to 'blossom' and bringing out many of the flavors originally overpowered by the anise. For most people, a good quality absinthe should not require sugar, but it is added according to taste and will also thicken the mouth-feel of the drink.
HISTORY
A vintage Pernod Fils absinthe advertisement.The precise origin of absinthe is unclear. The medical use of wormwood dates back to ancient Egypt and is mentioned in the Ebers Papyrus, circa 1550 BCE. Wormwood extracts and wine-soaked wormwood leaves were used as remedies by the ancient Greeks. [12] The first clear evidence of absinthe in the modern sense of a distilled spirit containing green anise and fennel, however, dates to the 18th century but may be older. According to popular legend, however, absinthe began as an all-purpose patent remedy created by Dr. Pierre Ordinaire, a French doctor living in Couvet, Switzerland, around 1792 (the exact date varies by account). Ordinaire's recipe was passed on to the Henriod sisters of Couvet, who sold absinthe as a medicinal elixir. In fact, by other accounts, the Henriod sisters may have already been making the elixir before Ordinaire's arrival. In either case, one Major Dubied in turn acquired the formula from the sisters and, in 1797, with his son Marcellin and son-in-law Henry-Louis Pernod, opened the first absinthe distillery, Dubied Père et Fils, in Couvet. In 1805 they built a second distillery in Pontarlier, France, under the new company name Maison Pernod Fils.[13]
Absinthe's popularity grew steadily until the 1840s, when absinthe was given to French troops as a fever preventative. When the troops returned home, they brought their taste for absinthe with them, and it became popular at bars and bistros.
By the 1860s, absinthe had become so popular that in most cafés and cabarets 5 p.m. signalled l’heure verte ('the green hour'). Still, it remained expensive and was favored mainly by the bourgeoisie and eccentric Bohemian artists. By the 1880s, however, the price had dropped significantly, the market expanded, and absinthe soon became the drink of France; by 1910 the French were consuming 36 million litres of absinthe per year.
Monday, May 17, 2010
Sunday, May 16, 2010
Whisky FAQ's
What is a deluxe blended Scotch Whisky?
It is a blend which contains a higher proportion of carefully selected older and, therefore, more expensive whiskies. When there is an age label on a bottle of blended whisky, does it refer to the average age of the whiskies in that blend?
No. The law requires that when the age is declared on a label, it must refer to the youngest whisky in the blend.
For example, if a blend is described as an eight year old, the youngest whisky in that blend must have been matured for at least eight years.
Is it legal to sell whisky which is less than three years old for consumption in this country?
No. Although the spirit is distilled under the strict conditions applied to the production of Scotch Whisky, it is not entitled to be described as Scotch Whisky until it has matured for three years. This does not apply to compounded spirits such as gin, vodka and liqueurs.
Get a Free Malt Whisky Voucher Click here.
Making Whisky
The magical processes used to create whisky have not changed a great deal over the years. Some of the more traditional techniques have fallen by the wayside as distilleries introduce more efficient, modern apparatus but as other countries have found, it is impossible to create Scotch anywhere else in the world with even the most scientific methods at your disposal. Whether it is the water, geography, climate, techniques used or some form of combination of these, it's not known for sure. All we do know is that whatever it is, it works! The main rules that define what makes ‘Scotch whisky’ are as follows - it must be made at a Scottish distillery using water and malted barley - it must spend at least three years maturing in oak casks - the whisky must be matured in Scotland Ingredients The main ingredients used in making whisky form a short list: Water - most of Scotland's water is very soft. Soft water will absorb more from the malted barley used to make whisky, than hard water will, which might offer a reason as to why it seems to make a suitable ingredient for whisky. Some also believe that peaty water will have an influence on the whisky, helping to give a peaty flavour to the drink. Otherwise the different waters used by distilleries should not affect the finished product too much. The most important factor for the distillery is that they have a large supply of water. Malt - malted barley, or malt, is always used for malt whisky, not surprisingly. In contrast, grain whiskies will use maize or other cereals. Malt is explained in more detail below. Yeast - one of the less significant factors when it comes to the flavour of the whisky, but nevertheless a crucial element as the yeast is used to trigger the chemical process that converts sugars in the malted barley into alcohol. Peat - peat is basically decayed vegetation that has not broken down in the soil due to poor drainage in the land. Cut from marshland bogs, it is used as fuel and in the case of whisky, as a fuel for halting the maturation process of the barley once it has begun to germinate. It adds a smoky flavour to whisky which is usually associated with the Island malts, particularly Islay whiskies, but is present in virtually all malts in varying degrees. Malting Once the barley has arrived at the distillery it is steeped in water to allow the germination process to begin. Shoots begin to grow from the grains of barley as a result. Before the germination can go too far and the barley grain begins to consume its own sugar in order to grow, it is heated to halt the process, by kilning the barley. It is at this stage that peat is used to introduce its flavour to greatest effect. Peat was traditionally the fuel used for drying and slightly cooking the malted barley in many parts of Scotland and is still used for the flavours it imparts. Depending on whether a distillery is using traditional floor maltings where the germinating barley is spread thinly on the floor, or a more modern system such as a rotary drum which allows the barley to be aired and heated more uniformly, the malting process can take between 20 and 48 hours. From here the malt will be ground down, or milled, ready for mashing. Mashing Warm water is added to the milled, malted barley which is then fed into a large, circular vessel called a mash-tun to allow the mashing to take place. Mashing is the stage where the starches in the barley convert to sugars which will later be fermented into alcohol. The mash-tun will contain either mechanical rakes or rotating blades that stir the mash. Slots in the base of the mash-tun allow the now sugary liquid, called ‘wort’, to run off. The wort will be recycled through the mash-tun three or four times before moving onto to be allowed to ferment. Fermentation By this stage the liquid is ready for fermentation. In a wash-back the wort has yeast added to it to encourage the chemical reaction that converts the sugars to alcohol. Washbacks were traditionally made of wood, although some distilleries now use stainless steel. While more time consuming to clean out and less sterile, it is reckoned by some distillery managers that using wooden vessels does add to the flavour of the whisky. Distillation Scottish whisky distilleries use pot-stills to distill the spirit that will become whisky. Pot-stills, the copper icons of the whisky industry, offer a means of evaporating the alcohol, which turns to vapour before water does, which is then condensed and collected after escaping through the neck of the still. The exact shape of the still, its height, the shape and length of the neck, the fact that the still is made from copper rather than another metal, all play their part in making each whisky individual. The use of copper in making stills is crucial, as it’s only this metal that will remove some of the unwanted elements from the spirit – experiments with stainless steel have proved the importance of the metal used in the still. The liquid will typically be distilled twice, first in a larger ‘wash’ still, then in a ‘low wines’ or ‘spirit’ still in order to collect the ‘heart of the run’, the batch of spirit that the stillman knows will be suitable for maturing as whisky. Maturation Scotch whisky is always matured in oak casks. The exact type of wood used in the maturation stage and what the cask has been used for prior to being filled with whisky lends a great deal to the final flavour of the whisky when it is bottled. Oak is sourced from America and Spain – the right choice of oak being crucial. New oak is never used for maturing whisky as the wood will lend too much flavour to the spirit. For the majority of whiskies, casks that have been used for maturing bourbon are used. American law prevents bourbon producers from using casks twice, so after being used, a cask is of little use to the bourbon industry. The Scotch whisky industry benefits from this, with the practice guaranteeing a steady supply of ex-bourbon casks. Some distillers will use ex-sherry casks from Spain instead, perhaps the most famous being The Macallan, which uses ex-oloroso sherry casks. While some whiskies spend their whole lives in the cask they were first poured into, some distilleries will use a second stage of maturation to add a different edge to the whisky. Glenmorange are one of the bigger producers of whisky that have done just this with their range of malts, which have Madeira, Port and Sherry finishes achieved by a maturation in a second barrel. Recent limited edition bottlings have also seen Malaga, Fino Sherry, Cognac, Bordeaux, Cote de Nuits finishes. Just how long the whisky will mature before it is bottled is another complex question. Three years is the legal minimum but most will spend much longer, depending partly on how quickly the whisky 'grows up' which will vary from one whisky to the next. Over time, flavours from the environment that the distillery is in such as salty seaside air may offer its own particular effects. Some whisky will also be lost gradually through time as a very slow evaporation occurs through the pores of the wooden cask. Seeping out at a rate of roughly 1-2% a year, this loss is known as the 'angels share.' When the distillery sees fit, the whisky will be bottled.
It is a blend which contains a higher proportion of carefully selected older and, therefore, more expensive whiskies. When there is an age label on a bottle of blended whisky, does it refer to the average age of the whiskies in that blend?
No. The law requires that when the age is declared on a label, it must refer to the youngest whisky in the blend.
For example, if a blend is described as an eight year old, the youngest whisky in that blend must have been matured for at least eight years.
Is it legal to sell whisky which is less than three years old for consumption in this country?
No. Although the spirit is distilled under the strict conditions applied to the production of Scotch Whisky, it is not entitled to be described as Scotch Whisky until it has matured for three years. This does not apply to compounded spirits such as gin, vodka and liqueurs.
Get a Free Malt Whisky Voucher Click here.
Making Whisky
The magical processes used to create whisky have not changed a great deal over the years. Some of the more traditional techniques have fallen by the wayside as distilleries introduce more efficient, modern apparatus but as other countries have found, it is impossible to create Scotch anywhere else in the world with even the most scientific methods at your disposal. Whether it is the water, geography, climate, techniques used or some form of combination of these, it's not known for sure. All we do know is that whatever it is, it works! The main rules that define what makes ‘Scotch whisky’ are as follows - it must be made at a Scottish distillery using water and malted barley - it must spend at least three years maturing in oak casks - the whisky must be matured in Scotland Ingredients The main ingredients used in making whisky form a short list: Water - most of Scotland's water is very soft. Soft water will absorb more from the malted barley used to make whisky, than hard water will, which might offer a reason as to why it seems to make a suitable ingredient for whisky. Some also believe that peaty water will have an influence on the whisky, helping to give a peaty flavour to the drink. Otherwise the different waters used by distilleries should not affect the finished product too much. The most important factor for the distillery is that they have a large supply of water. Malt - malted barley, or malt, is always used for malt whisky, not surprisingly. In contrast, grain whiskies will use maize or other cereals. Malt is explained in more detail below. Yeast - one of the less significant factors when it comes to the flavour of the whisky, but nevertheless a crucial element as the yeast is used to trigger the chemical process that converts sugars in the malted barley into alcohol. Peat - peat is basically decayed vegetation that has not broken down in the soil due to poor drainage in the land. Cut from marshland bogs, it is used as fuel and in the case of whisky, as a fuel for halting the maturation process of the barley once it has begun to germinate. It adds a smoky flavour to whisky which is usually associated with the Island malts, particularly Islay whiskies, but is present in virtually all malts in varying degrees. Malting Once the barley has arrived at the distillery it is steeped in water to allow the germination process to begin. Shoots begin to grow from the grains of barley as a result. Before the germination can go too far and the barley grain begins to consume its own sugar in order to grow, it is heated to halt the process, by kilning the barley. It is at this stage that peat is used to introduce its flavour to greatest effect. Peat was traditionally the fuel used for drying and slightly cooking the malted barley in many parts of Scotland and is still used for the flavours it imparts. Depending on whether a distillery is using traditional floor maltings where the germinating barley is spread thinly on the floor, or a more modern system such as a rotary drum which allows the barley to be aired and heated more uniformly, the malting process can take between 20 and 48 hours. From here the malt will be ground down, or milled, ready for mashing. Mashing Warm water is added to the milled, malted barley which is then fed into a large, circular vessel called a mash-tun to allow the mashing to take place. Mashing is the stage where the starches in the barley convert to sugars which will later be fermented into alcohol. The mash-tun will contain either mechanical rakes or rotating blades that stir the mash. Slots in the base of the mash-tun allow the now sugary liquid, called ‘wort’, to run off. The wort will be recycled through the mash-tun three or four times before moving onto to be allowed to ferment. Fermentation By this stage the liquid is ready for fermentation. In a wash-back the wort has yeast added to it to encourage the chemical reaction that converts the sugars to alcohol. Washbacks were traditionally made of wood, although some distilleries now use stainless steel. While more time consuming to clean out and less sterile, it is reckoned by some distillery managers that using wooden vessels does add to the flavour of the whisky. Distillation Scottish whisky distilleries use pot-stills to distill the spirit that will become whisky. Pot-stills, the copper icons of the whisky industry, offer a means of evaporating the alcohol, which turns to vapour before water does, which is then condensed and collected after escaping through the neck of the still. The exact shape of the still, its height, the shape and length of the neck, the fact that the still is made from copper rather than another metal, all play their part in making each whisky individual. The use of copper in making stills is crucial, as it’s only this metal that will remove some of the unwanted elements from the spirit – experiments with stainless steel have proved the importance of the metal used in the still. The liquid will typically be distilled twice, first in a larger ‘wash’ still, then in a ‘low wines’ or ‘spirit’ still in order to collect the ‘heart of the run’, the batch of spirit that the stillman knows will be suitable for maturing as whisky. Maturation Scotch whisky is always matured in oak casks. The exact type of wood used in the maturation stage and what the cask has been used for prior to being filled with whisky lends a great deal to the final flavour of the whisky when it is bottled. Oak is sourced from America and Spain – the right choice of oak being crucial. New oak is never used for maturing whisky as the wood will lend too much flavour to the spirit. For the majority of whiskies, casks that have been used for maturing bourbon are used. American law prevents bourbon producers from using casks twice, so after being used, a cask is of little use to the bourbon industry. The Scotch whisky industry benefits from this, with the practice guaranteeing a steady supply of ex-bourbon casks. Some distillers will use ex-sherry casks from Spain instead, perhaps the most famous being The Macallan, which uses ex-oloroso sherry casks. While some whiskies spend their whole lives in the cask they were first poured into, some distilleries will use a second stage of maturation to add a different edge to the whisky. Glenmorange are one of the bigger producers of whisky that have done just this with their range of malts, which have Madeira, Port and Sherry finishes achieved by a maturation in a second barrel. Recent limited edition bottlings have also seen Malaga, Fino Sherry, Cognac, Bordeaux, Cote de Nuits finishes. Just how long the whisky will mature before it is bottled is another complex question. Three years is the legal minimum but most will spend much longer, depending partly on how quickly the whisky 'grows up' which will vary from one whisky to the next. Over time, flavours from the environment that the distillery is in such as salty seaside air may offer its own particular effects. Some whisky will also be lost gradually through time as a very slow evaporation occurs through the pores of the wooden cask. Seeping out at a rate of roughly 1-2% a year, this loss is known as the 'angels share.' When the distillery sees fit, the whisky will be bottled.
Whisky FAQ's
Why do whiskies produced in different distilleries vary in flavour?
This again is a question which it is very difficult to answer with certainty. Most people would agree that the water used is the decisive factor. Adjoining distilleries which draw their water from different sources are known to produce whiskies that are quite dissimilar in flavour.
The size and shape of the stills are also important as are the skill and experience of the men who manage them. It is the objective of the distiller to produce a whisky whose flavour and character remain consistent at all times and in all circumstances. This is the true art of distilling, acquired only after many years and often handed down from one generation to the next.
How many distilleries are there?
There are around 100 Pot Still Malt distilleries and Grain, or Patent Still, distilleries in Scotland; but the number working can vary from year to year.
Can Scotch Whisky be made only in Scotland?
Yes. Many other products which were originally manufactured only in a particular locality have lost their geographical significance and can now be manufactured anywhere. The word ‘Scotch’, however, as applied to whisky, has retained its geographical significance. This is widely recognised in law throughout the world. Thus, whisky may be described as Scotch Whisky only if it has been wholly distilled and matured in Scotland for a minimum of 3 years.
If you could duplicate exactly a Scotch Whisky distillery in, say, Brazil or Spain, could you produce Scotch?
No. For the reason given in the preceding answer, whisky can be called ‘Scotch’ only if it is distilled and matured in Scotland. Whisky produced in Brazil is ‘Brazilian Whisky’ or in Spain ‘Spanish Whisky’. Attempts have been made to copy the unique flavour of Scotch Whiskies in many parts of the world, but with no success whatsoever.
What is blending? What is its purpose?
A number of distilleries bottle and sell some of the whisky they distil for consumption as single or unblended whiskies. By far the greater part of their production, however, is used for the well-known blended Scotch Whiskies that are sold all over the world.
Blending whisky is a considerable art acquired only after years of experience.
A blend will consist of anything from 15 to 50 different single whiskies, combined in the proportions of a formula that is the secret of the blending company concerned.
Whiskies from different distilleries have a character of their own and, just as people of different temperaments are often incompatible, so some whiskies will not blend happily with certain others. The Malts and Grains in a blend must therefore, be chosen to complement and enhance their respective flavours. Blending is in no sense a dilution. The blender's task is to combine different single whiskies, to produce a blend which brings out the best qualities of each of its constituent parts.
The aim of the blender is first to produce a whisky of a definite and recognisable character.
It is of the greatest importance that his blend should never vary from this standard, which his customers all over the world will have come to expect. His second aim is, therefore, to achieve consistency.
The blender must also decide when the different single whiskies are ready to be used in his blend. They are brought from the warehouse where they have been maturing to the blending establishment, where they are mixed together in a blending vat. They are usually returned to cask and left to ‘marry’ for a period of months, before bottling. Some companies prefer to vat their Malts and Grains separately and only bring the two together before bottling.
The combining of Malt with Malt or Grain with Grain is known as vatting.
When was blending introduced?
Blending was pioneered by Andrew Usher in Edinburgh in the early 1860s. It was only after this practice became common that a taste for Scotch Whisky spread first to England and then throughout the world.
The reason for this was that Pot Still Malt Whisky was inclined to be too strongly flavoured for everyday drinking, especially by people in sedentary occupations and warm climates. By combining Malt Whisky with Grain Whisky, which has less pronounced characteristics, the demand for a whisky that is milder in flavour and more suited to the conditions of modern life can be met.
What is the percentage of Malt and Grain Whiskies in blended Scotch Whisky?
There is no fixed percentage and the proportion differs from one blender to another. No brand owner is willing to reveal the proportions of the different whiskies used, but the blender determines the proportion according to the character he is seeking for his blend. This character is determined not only by the proportions of Malt and Grain Whisky which it contains, but also by factors such as the ages of the individual whiskies and the manner in which they combine to bring out the finest qualities in each other.
This again is a question which it is very difficult to answer with certainty. Most people would agree that the water used is the decisive factor. Adjoining distilleries which draw their water from different sources are known to produce whiskies that are quite dissimilar in flavour.
The size and shape of the stills are also important as are the skill and experience of the men who manage them. It is the objective of the distiller to produce a whisky whose flavour and character remain consistent at all times and in all circumstances. This is the true art of distilling, acquired only after many years and often handed down from one generation to the next.
How many distilleries are there?
There are around 100 Pot Still Malt distilleries and Grain, or Patent Still, distilleries in Scotland; but the number working can vary from year to year.
Can Scotch Whisky be made only in Scotland?
Yes. Many other products which were originally manufactured only in a particular locality have lost their geographical significance and can now be manufactured anywhere. The word ‘Scotch’, however, as applied to whisky, has retained its geographical significance. This is widely recognised in law throughout the world. Thus, whisky may be described as Scotch Whisky only if it has been wholly distilled and matured in Scotland for a minimum of 3 years.
If you could duplicate exactly a Scotch Whisky distillery in, say, Brazil or Spain, could you produce Scotch?
No. For the reason given in the preceding answer, whisky can be called ‘Scotch’ only if it is distilled and matured in Scotland. Whisky produced in Brazil is ‘Brazilian Whisky’ or in Spain ‘Spanish Whisky’. Attempts have been made to copy the unique flavour of Scotch Whiskies in many parts of the world, but with no success whatsoever.
What is blending? What is its purpose?
A number of distilleries bottle and sell some of the whisky they distil for consumption as single or unblended whiskies. By far the greater part of their production, however, is used for the well-known blended Scotch Whiskies that are sold all over the world.
Blending whisky is a considerable art acquired only after years of experience.
A blend will consist of anything from 15 to 50 different single whiskies, combined in the proportions of a formula that is the secret of the blending company concerned.
Whiskies from different distilleries have a character of their own and, just as people of different temperaments are often incompatible, so some whiskies will not blend happily with certain others. The Malts and Grains in a blend must therefore, be chosen to complement and enhance their respective flavours. Blending is in no sense a dilution. The blender's task is to combine different single whiskies, to produce a blend which brings out the best qualities of each of its constituent parts.
The aim of the blender is first to produce a whisky of a definite and recognisable character.
It is of the greatest importance that his blend should never vary from this standard, which his customers all over the world will have come to expect. His second aim is, therefore, to achieve consistency.
The blender must also decide when the different single whiskies are ready to be used in his blend. They are brought from the warehouse where they have been maturing to the blending establishment, where they are mixed together in a blending vat. They are usually returned to cask and left to ‘marry’ for a period of months, before bottling. Some companies prefer to vat their Malts and Grains separately and only bring the two together before bottling.
The combining of Malt with Malt or Grain with Grain is known as vatting.
When was blending introduced?
Blending was pioneered by Andrew Usher in Edinburgh in the early 1860s. It was only after this practice became common that a taste for Scotch Whisky spread first to England and then throughout the world.
The reason for this was that Pot Still Malt Whisky was inclined to be too strongly flavoured for everyday drinking, especially by people in sedentary occupations and warm climates. By combining Malt Whisky with Grain Whisky, which has less pronounced characteristics, the demand for a whisky that is milder in flavour and more suited to the conditions of modern life can be met.
What is the percentage of Malt and Grain Whiskies in blended Scotch Whisky?
There is no fixed percentage and the proportion differs from one blender to another. No brand owner is willing to reveal the proportions of the different whiskies used, but the blender determines the proportion according to the character he is seeking for his blend. This character is determined not only by the proportions of Malt and Grain Whisky which it contains, but also by factors such as the ages of the individual whiskies and the manner in which they combine to bring out the finest qualities in each other.
Whisky FAQ's
THE ART OF BLENDING
While the distinctive single malts produced by individual distilleries are becoming increasingly popular, blending creates over 90% of the Scotch whisky enjoyed throughout the world.
By nosing samples in tulip-shaped glasses the blender selects from a wide palate - from the numerous Highland and Speyside malts to the strongly flavoured and peaty Island malts, and the softer and lighter Lowland malts. These malts are combined with grain whiskies - usually 60-80% grain whiskies to 20-40% malt whiskies, and are then left to 'marry' in casks before being bottled as one of the world-renowned blended whiskies.
A blend of a range of malt whiskies, with no grain whisky included, is known as a vatted malt.
The way we make Scotch whisky has evolved over several centuries, but the history of Scotch whisky embraces a much wider heritage; that of Scotland and its people.
What are the main kinds of Scotch Whisky?
There are two kinds of Scotch Whisky - Malt Whisky and Grain Whisky. The Malt Whiskies are divided into four groups according to the geographical location of the distilleries in which they are made, as follows:
(1) Lowland Malt Whiskies, made south of an imaginary line drawn from Dundee in the east to Greenock in the west.
(2) Highland Malt Whiskies, made north of that line.
(3) Speyside Malt Whiskies, from the valley of the River Spey. Although these whiskies come from within the area designated as Highland Malt Whiskies, the concentration of distilleries and the specific climatic conditions produce a whisky of an identifiable character and require a separate classification.
(4) Islay Malt Whiskies, from the island of Islay.
Each group has its own clearly defined characteristics, ranging from the lighter Lowland Malt Whiskies to those distilled on Islay which are generally regarded as the heaviest Malt Whiskies.
Malt Whiskies, which differ considerably in flavour according to the distillery from which they come, have a more pronounced bouquet and flavour than the Grain Whiskies. The production of Grain Whisky is not so influenced by geographical factors and it may be distilled anywhere in Scotland.
What gives Scotch Whisky its distinctive flavour and bouquet?
This is one of the mysteries of the industry and a secret which many imitators of Scotch Whisky have tried in vain to discover. Many theories and explanations have been put forward, but there is no universally accepted solution.
The distilling process itself is one factor. Scotch Whisky, after it has been distilled, contains not only ethyl alcohol and water but certain secondary constituents. The exact nature of these is not fully understood, but it is believed they include some of the essential oils from the malted barley and other cereals and substances that derive from the peat. The amount of these secondary constituents retained in the spirit depends upon the shape of the still and the way it is operated and also on the strength at which the spirit is drawn off. Grain Whisky, because of the process by which it is made, contains fewer secondary constituents than Malt Whisky and is accordingly milder in flavour and aroma.
The natural elements of water, peat and the Scottish climate all certainly have a profound effect on the flavour of Scotch Whisky. Water is probably the most important single factor and a source of good, soft water is essential to a distillery. Peat, which is used in the kiln or oven in which the malt is dried, also has an influence that can be detected in the ‘peaty’ or smoky flavour of many Scotch Whiskies.
The Scottish climate is extremely important, particularly when the whisky is maturing. At this stage the soft air permeates the casks and works on the whisky, eliminating harsher constituents to produce a mellow whisky.
While the distinctive single malts produced by individual distilleries are becoming increasingly popular, blending creates over 90% of the Scotch whisky enjoyed throughout the world.
By nosing samples in tulip-shaped glasses the blender selects from a wide palate - from the numerous Highland and Speyside malts to the strongly flavoured and peaty Island malts, and the softer and lighter Lowland malts. These malts are combined with grain whiskies - usually 60-80% grain whiskies to 20-40% malt whiskies, and are then left to 'marry' in casks before being bottled as one of the world-renowned blended whiskies.
A blend of a range of malt whiskies, with no grain whisky included, is known as a vatted malt.
The way we make Scotch whisky has evolved over several centuries, but the history of Scotch whisky embraces a much wider heritage; that of Scotland and its people.
What are the main kinds of Scotch Whisky?
There are two kinds of Scotch Whisky - Malt Whisky and Grain Whisky. The Malt Whiskies are divided into four groups according to the geographical location of the distilleries in which they are made, as follows:
(1) Lowland Malt Whiskies, made south of an imaginary line drawn from Dundee in the east to Greenock in the west.
(2) Highland Malt Whiskies, made north of that line.
(3) Speyside Malt Whiskies, from the valley of the River Spey. Although these whiskies come from within the area designated as Highland Malt Whiskies, the concentration of distilleries and the specific climatic conditions produce a whisky of an identifiable character and require a separate classification.
(4) Islay Malt Whiskies, from the island of Islay.
Each group has its own clearly defined characteristics, ranging from the lighter Lowland Malt Whiskies to those distilled on Islay which are generally regarded as the heaviest Malt Whiskies.
Malt Whiskies, which differ considerably in flavour according to the distillery from which they come, have a more pronounced bouquet and flavour than the Grain Whiskies. The production of Grain Whisky is not so influenced by geographical factors and it may be distilled anywhere in Scotland.
What gives Scotch Whisky its distinctive flavour and bouquet?
This is one of the mysteries of the industry and a secret which many imitators of Scotch Whisky have tried in vain to discover. Many theories and explanations have been put forward, but there is no universally accepted solution.
The distilling process itself is one factor. Scotch Whisky, after it has been distilled, contains not only ethyl alcohol and water but certain secondary constituents. The exact nature of these is not fully understood, but it is believed they include some of the essential oils from the malted barley and other cereals and substances that derive from the peat. The amount of these secondary constituents retained in the spirit depends upon the shape of the still and the way it is operated and also on the strength at which the spirit is drawn off. Grain Whisky, because of the process by which it is made, contains fewer secondary constituents than Malt Whisky and is accordingly milder in flavour and aroma.
The natural elements of water, peat and the Scottish climate all certainly have a profound effect on the flavour of Scotch Whisky. Water is probably the most important single factor and a source of good, soft water is essential to a distillery. Peat, which is used in the kiln or oven in which the malt is dried, also has an influence that can be detected in the ‘peaty’ or smoky flavour of many Scotch Whiskies.
The Scottish climate is extremely important, particularly when the whisky is maturing. At this stage the soft air permeates the casks and works on the whisky, eliminating harsher constituents to produce a mellow whisky.
Whisky FAQ's
5. Distillation
The wash is distilled twice - first in the wash still, to separate the alcohol from the water, yeast and residue called pot ale - the solids of which are also saved for use in animal feeds.
The distillate from the wash still, known as low wines, and containing about 20% alcohol by volume, then goes to the spirit still for the second distillation. The more volatile compounds which distil off first - the foreshots, and the final runnings called feints where more oily compounds are vaporized, are both channelled off to be redistilled when mixed with the low wines in the next batch.
Only the pure centre cut, or heart of the run, which is about 68% alcohol by volume is collected in the spirit receiver.
6. Spirit Safe
All the distillates pass through the spirit safe - whose locks were traditionally controlled by the Customs & Excise. The stillman uses all his years of experience to test and judge the various distillates without being able to come into physical contact with the spirit.
The newly distilled, colourless, fiery spirit reduced to maturing strength, 63% alcohol by volume, is filled into oak casks which may have previously contained Scotch whisky, bourbon or sherry, and the maturation process begins.
THE MAKING OF GRAIN WHISKY
1. Scotch grain whisky is usually made from 10-20% malted barley and then other unmalted cereals such as maize or wheat. The starch in the non-malted cereals is released by pre-cooking and converted into fermentable sugars. The mashing and fermentation processes are similar to those used for malt whisky.
2. The wash is distilled in a continuous or Coffey still, named after its inventor Aeneas Coffey. It has two tall columns - a rectifier and an analyser. Cold wash is pumped in at the top of the rectifier and meets steam. The columns in fact act like a heat exchanger. The alcohol is cooled, condenses and flows away as Scotch grain spirit at about 94% alcohol by volume.
3. The distilled grain spirit is lighter in character and aroma than most malt whiskies and therefore requires rather less time to mature. The bulk of matured grain whisky is used for blending.
THE MATURATION PROCESS
While maturing, the whisky becomes smoother, gains flavour, and draws its golden colour from the cask. A proportion of the higher alcohols turn into esters and other complex compounds which subtly enhance each whisky's distinctive characteristics.
By law all Scotch whisky must be matured for at least 3 years, but most single malts lie in the wood for 8, 10, 12, 15 years or longer. Customs & Excise allow for a maximum of 2% of the whisky to evaporate from the cask each year - the Angels' Share. Unlike wine, whisky does not mature further once it is in the bottle.
The wash is distilled twice - first in the wash still, to separate the alcohol from the water, yeast and residue called pot ale - the solids of which are also saved for use in animal feeds.
The distillate from the wash still, known as low wines, and containing about 20% alcohol by volume, then goes to the spirit still for the second distillation. The more volatile compounds which distil off first - the foreshots, and the final runnings called feints where more oily compounds are vaporized, are both channelled off to be redistilled when mixed with the low wines in the next batch.
Only the pure centre cut, or heart of the run, which is about 68% alcohol by volume is collected in the spirit receiver.
6. Spirit Safe
All the distillates pass through the spirit safe - whose locks were traditionally controlled by the Customs & Excise. The stillman uses all his years of experience to test and judge the various distillates without being able to come into physical contact with the spirit.
The newly distilled, colourless, fiery spirit reduced to maturing strength, 63% alcohol by volume, is filled into oak casks which may have previously contained Scotch whisky, bourbon or sherry, and the maturation process begins.
THE MAKING OF GRAIN WHISKY
1. Scotch grain whisky is usually made from 10-20% malted barley and then other unmalted cereals such as maize or wheat. The starch in the non-malted cereals is released by pre-cooking and converted into fermentable sugars. The mashing and fermentation processes are similar to those used for malt whisky.
2. The wash is distilled in a continuous or Coffey still, named after its inventor Aeneas Coffey. It has two tall columns - a rectifier and an analyser. Cold wash is pumped in at the top of the rectifier and meets steam. The columns in fact act like a heat exchanger. The alcohol is cooled, condenses and flows away as Scotch grain spirit at about 94% alcohol by volume.
3. The distilled grain spirit is lighter in character and aroma than most malt whiskies and therefore requires rather less time to mature. The bulk of matured grain whisky is used for blending.
THE MATURATION PROCESS
While maturing, the whisky becomes smoother, gains flavour, and draws its golden colour from the cask. A proportion of the higher alcohols turn into esters and other complex compounds which subtly enhance each whisky's distinctive characteristics.
By law all Scotch whisky must be matured for at least 3 years, but most single malts lie in the wood for 8, 10, 12, 15 years or longer. Customs & Excise allow for a maximum of 2% of the whisky to evaporate from the cask each year - the Angels' Share. Unlike wine, whisky does not mature further once it is in the bottle.
Whisky FAQ's
THE MAKING OF MALT WHISKY
The origins of malt whisky distilling in Scotland are lost in the mists of antiquity. They date back at least to the monks of the 15'" century and probably long before.
Although the distillers' art has been understood since earliest times, the subtle aromas and flavours of whisky have never been fully explained, even today. The ancient term using beatha, which is Gaelic for the Latin aqua vitae or 'water of life', was corrupted in the 18'" century to usky, and then to whisky. The following description is a generalisation of the process.
It should be remembered that each distillery has its own unique specifications.
1. Malting
Best quality barley is first steeped in water and then spread out on malting floors to germinate. It is turned regularly to prevent the build up of heat. Traditionally, this was done by tossing the barley into the air with wooden shovels in a malt barn adjacent to the kiln.
During this process enzymes are activated which convert the starch into sugar when mashing takes place. After 6 to 7 days of germination the barley, now called green malt, goes to the kiln for drying. This halts the germination. The heat is kept below 70°C so that the enzymes are not destroyed. Peat may be added to the fire to impart flavour from the smoke.
2. Mashing
The dried malt is ground into a coarse flour or grist, which is mixed with hot water in the mash tun. The water is added in 3 stages and gets hotter at each stage, starting around 67°C and rising to almost boiling point.
The quality of the pure Scottish water is important. The mash is stirred, helping to convert the starches to sugar. After mashing, the sweet sugary liquid is known as wort. The spent grains - the draff - is processed into cattle feed.
3. Fermentation
The wort is cooled to 20°C and pumped into washbacks, where yeast is added and fermentation begins. The living yeast feeds on the sugars, producing alcohol and small quantities of other compounds known as congeners, which contribute to the flavour of the whisky. Carbon dioxide is also produced and the wash froths violently. Revolving switchers cut the head to prevent it overflowing. After about 2 days the fermentation dies down and the wash contains 6-8% alcohol by volume.
4. Pot Stills
In some mysterious way the shape of the pot still affects the character of the individual malt whisky, and each distillery keeps its stills exactly the same over the years.
In distillation, the still is heated to just below the boiling point of water and the alcohol and other compounds vaporize and pass over the neck of the still into either a condenser or a worm - a large copper coil immersed in cold running water where the vapour is condensed into a liquid.
The origins of malt whisky distilling in Scotland are lost in the mists of antiquity. They date back at least to the monks of the 15'" century and probably long before.
Although the distillers' art has been understood since earliest times, the subtle aromas and flavours of whisky have never been fully explained, even today. The ancient term using beatha, which is Gaelic for the Latin aqua vitae or 'water of life', was corrupted in the 18'" century to usky, and then to whisky. The following description is a generalisation of the process.
It should be remembered that each distillery has its own unique specifications.
1. Malting
Best quality barley is first steeped in water and then spread out on malting floors to germinate. It is turned regularly to prevent the build up of heat. Traditionally, this was done by tossing the barley into the air with wooden shovels in a malt barn adjacent to the kiln.
During this process enzymes are activated which convert the starch into sugar when mashing takes place. After 6 to 7 days of germination the barley, now called green malt, goes to the kiln for drying. This halts the germination. The heat is kept below 70°C so that the enzymes are not destroyed. Peat may be added to the fire to impart flavour from the smoke.
2. Mashing
The dried malt is ground into a coarse flour or grist, which is mixed with hot water in the mash tun. The water is added in 3 stages and gets hotter at each stage, starting around 67°C and rising to almost boiling point.
The quality of the pure Scottish water is important. The mash is stirred, helping to convert the starches to sugar. After mashing, the sweet sugary liquid is known as wort. The spent grains - the draff - is processed into cattle feed.
3. Fermentation
The wort is cooled to 20°C and pumped into washbacks, where yeast is added and fermentation begins. The living yeast feeds on the sugars, producing alcohol and small quantities of other compounds known as congeners, which contribute to the flavour of the whisky. Carbon dioxide is also produced and the wash froths violently. Revolving switchers cut the head to prevent it overflowing. After about 2 days the fermentation dies down and the wash contains 6-8% alcohol by volume.
4. Pot Stills
In some mysterious way the shape of the pot still affects the character of the individual malt whisky, and each distillery keeps its stills exactly the same over the years.
In distillation, the still is heated to just below the boiling point of water and the alcohol and other compounds vaporize and pass over the neck of the still into either a condenser or a worm - a large copper coil immersed in cold running water where the vapour is condensed into a liquid.
Whisky FAQ's
What is draff?
Draff is the spent grain left in the mash-tun after the liquor, wort, has been drawn off. It represents, as a rule, about 25 per cent of the malt and unmalted cereals, if any, put into the mash-tun. Draff enjoys a large market as cattle food.
What are the principal by-products of Scotch Whisky?
The liquids and solids remaining after distillation are not wasted, nor are they allowed to pollute rivers or coastlines. In recent years the Scotch Whisky industry has invested heavily in developing methods of treating the residue of distillation so that it now makes an important contribution to the animal foodstuffs industry.
Most distilleries now possess by-products plants or, in the case of smaller distilleries in remote areas, send their waste material to the area plants which process it into dark grains. These are extremely rich in protein and are sold in palletised form to farmers who use them to enrich cattle food.
Grain Whisky distilleries usually recover the carbon dioxide produced during the fermentation stage. This has several applications in industry and in the production of soft drinks.
What is meant by Under Bond and Duty Paid sales, respectively?
(a) Sales Under Bond are sales on which the Excise Duty has not been paid. The goods are consigned to a bonded duty-free warehouse.
(b) Sales Duty Paid are sales on which the Excise Duty has already been paid.
What is the origin of the name 'whisky'?
The term ‘whisky’ derives originally from the Gaelic ‘uisge beatha’, or ‘usquebaugh’, meaning ‘water of life’. Gaelic is that branch of Celtic spoken in the Highlands of Scotland.
When was Scotch Whisky first distilled?
Whisky has been distilled in Scotland for hundreds of years. There is some evidence to show that the art of distilling could have been brought to the country by Christian missionary monks, but it has never been proved that Highland farmers did not themselves discover how to distil spirits from their surplus barley.
The earliest historical reference to whisky comes much later, Mr J Marshall Robb, in his book ‘Scotch Whisky’, says: ‘The oldest reference to whisky occurs in the Scottish Exchequer Rolls for 1494, where there is an entry of ‘eight bolls of malt to Friar John Cor wherewith to make aquavitae’. A boll was an old Scottish measure of not more than six bushels. (One bushel is equivalent to 25.4 kiIograms)
When King James IV was in Inverness during September 1506, his Treasurer’s Accounts had entries for the 15th and 17th of the month respectively: ‘For aqua vite to the King. . .’ and ‘For ane flacat of aqua vite to the King. . .’. lt is probable that the aquavitae in this case was spirit for drinking.
The earliest reference to a distillery in the Acts of the Scottish Parliament appears to be in 1690, when mention is made of the famous Ferintosh distillery owned by Duncan Forbes of Culloden.
There is also a reference to distilling in a private house in the parish of Gamrie in Banffshire in 1614. This occurs in the Register of the Privy Council, where a man accused of the crime of breaking into a private house, combined with assault, was said to have knocked over some ‘aquavitie’.
One of the earliest references to ‘uiskie’ occurs in the funeral account of a Highland laird about 1618.
An unpublished letter of February 1622, written by Sir Duncan Campbell of Glenorchy to the Earl of Mar, reported that certain officers sent to Glenorchy by the King had been given the best entertainment that the season and the country allowed. It stated: ‘For they wantit not wine nor aquavite.’ This ‘aquavite’ was no doubt locally distilled whisky.
Another writer affirms that aquavitae occasionally formed part of the rent paid for Highland farms, at any rate in Perthshire, but no actual date is given for this practice.
What is the history of charging duty on Scotch Whisky?
The Scots Parliament in 1644 passed an Excise Act fixing the duty at 2/8d (13p) per pint of aquavitae or other strong liquor - the Scots pint being approximately one third of a gallon. For the remainder of the 17th century various alterations were made to the types and amounts of duty collected.
After the Union of the Parliaments in 1707, English revenue staff crossed the border to begin their lengthy attempts to bring whisky production under control. Ninety years later the excise laws were in such a hopeless state of confusion that no two distilleries were taxed at the same rate. Illicit distilling flourished, the smugglers seeing no good reason for paying for the privilege of making their native drink.
After a lengthy Royal Commission, the Act of 1823 sanctioned legal distilling at a duty of 2/3d (12p) per gallon for stills with a capacity of more than 40 gallons. There was a licence fee of £10 annually and no stills under the legal limit were allowed. The first distillery came into ‘official’ existence in the following year and thereafter many of the more far-sighted distillers came over on to the side of the law.
In 1840, the duty was 5d (2.5p) per bottle and by the beginning of the First World War it had risen to 1/81/2d (9p). In 1939, a typical bottle of Scotch Whisky cost 14/3d (72p) of which 9/71/2d (48p) was duty. By 1992, after a succession of duty increases, the same bottle was costing around £10.80. The duty on it was £5.55, equivalent to £19.81 per litre of pure alcohol.
In 1995, for the first time in one hundred years, the tax on Scotch Whisky was reduced. Duty fell from £5.77 to £5.54 a bottle (70cl). In 1996, the tax on Scotch Whisky was again reduced.
Since 1973 the price of a bottle of whisky, including the Excise Duty, has been subject to a Value Added Tax.
Scotch Whisky" The Water of Life
Draff is the spent grain left in the mash-tun after the liquor, wort, has been drawn off. It represents, as a rule, about 25 per cent of the malt and unmalted cereals, if any, put into the mash-tun. Draff enjoys a large market as cattle food.
What are the principal by-products of Scotch Whisky?
The liquids and solids remaining after distillation are not wasted, nor are they allowed to pollute rivers or coastlines. In recent years the Scotch Whisky industry has invested heavily in developing methods of treating the residue of distillation so that it now makes an important contribution to the animal foodstuffs industry.
Most distilleries now possess by-products plants or, in the case of smaller distilleries in remote areas, send their waste material to the area plants which process it into dark grains. These are extremely rich in protein and are sold in palletised form to farmers who use them to enrich cattle food.
Grain Whisky distilleries usually recover the carbon dioxide produced during the fermentation stage. This has several applications in industry and in the production of soft drinks.
What is meant by Under Bond and Duty Paid sales, respectively?
(a) Sales Under Bond are sales on which the Excise Duty has not been paid. The goods are consigned to a bonded duty-free warehouse.
(b) Sales Duty Paid are sales on which the Excise Duty has already been paid.
What is the origin of the name 'whisky'?
The term ‘whisky’ derives originally from the Gaelic ‘uisge beatha’, or ‘usquebaugh’, meaning ‘water of life’. Gaelic is that branch of Celtic spoken in the Highlands of Scotland.
When was Scotch Whisky first distilled?
Whisky has been distilled in Scotland for hundreds of years. There is some evidence to show that the art of distilling could have been brought to the country by Christian missionary monks, but it has never been proved that Highland farmers did not themselves discover how to distil spirits from their surplus barley.
The earliest historical reference to whisky comes much later, Mr J Marshall Robb, in his book ‘Scotch Whisky’, says: ‘The oldest reference to whisky occurs in the Scottish Exchequer Rolls for 1494, where there is an entry of ‘eight bolls of malt to Friar John Cor wherewith to make aquavitae’. A boll was an old Scottish measure of not more than six bushels. (One bushel is equivalent to 25.4 kiIograms)
When King James IV was in Inverness during September 1506, his Treasurer’s Accounts had entries for the 15th and 17th of the month respectively: ‘For aqua vite to the King. . .’ and ‘For ane flacat of aqua vite to the King. . .’. lt is probable that the aquavitae in this case was spirit for drinking.
The earliest reference to a distillery in the Acts of the Scottish Parliament appears to be in 1690, when mention is made of the famous Ferintosh distillery owned by Duncan Forbes of Culloden.
There is also a reference to distilling in a private house in the parish of Gamrie in Banffshire in 1614. This occurs in the Register of the Privy Council, where a man accused of the crime of breaking into a private house, combined with assault, was said to have knocked over some ‘aquavitie’.
One of the earliest references to ‘uiskie’ occurs in the funeral account of a Highland laird about 1618.
An unpublished letter of February 1622, written by Sir Duncan Campbell of Glenorchy to the Earl of Mar, reported that certain officers sent to Glenorchy by the King had been given the best entertainment that the season and the country allowed. It stated: ‘For they wantit not wine nor aquavite.’ This ‘aquavite’ was no doubt locally distilled whisky.
Another writer affirms that aquavitae occasionally formed part of the rent paid for Highland farms, at any rate in Perthshire, but no actual date is given for this practice.
What is the history of charging duty on Scotch Whisky?
The Scots Parliament in 1644 passed an Excise Act fixing the duty at 2/8d (13p) per pint of aquavitae or other strong liquor - the Scots pint being approximately one third of a gallon. For the remainder of the 17th century various alterations were made to the types and amounts of duty collected.
After the Union of the Parliaments in 1707, English revenue staff crossed the border to begin their lengthy attempts to bring whisky production under control. Ninety years later the excise laws were in such a hopeless state of confusion that no two distilleries were taxed at the same rate. Illicit distilling flourished, the smugglers seeing no good reason for paying for the privilege of making their native drink.
After a lengthy Royal Commission, the Act of 1823 sanctioned legal distilling at a duty of 2/3d (12p) per gallon for stills with a capacity of more than 40 gallons. There was a licence fee of £10 annually and no stills under the legal limit were allowed. The first distillery came into ‘official’ existence in the following year and thereafter many of the more far-sighted distillers came over on to the side of the law.
In 1840, the duty was 5d (2.5p) per bottle and by the beginning of the First World War it had risen to 1/81/2d (9p). In 1939, a typical bottle of Scotch Whisky cost 14/3d (72p) of which 9/71/2d (48p) was duty. By 1992, after a succession of duty increases, the same bottle was costing around £10.80. The duty on it was £5.55, equivalent to £19.81 per litre of pure alcohol.
In 1995, for the first time in one hundred years, the tax on Scotch Whisky was reduced. Duty fell from £5.77 to £5.54 a bottle (70cl). In 1996, the tax on Scotch Whisky was again reduced.
Since 1973 the price of a bottle of whisky, including the Excise Duty, has been subject to a Value Added Tax.
Scotch Whisky" The Water of Life
Subscribe to:
Posts (Atom)