Whisky FAQ's

THE MAKING OF MALT WHISKY

The origins of malt whisky distilling in Scotland are lost in the mists of antiquity. They date back at least to the monks of the 15'" century and probably long before.
Although the distillers' art has been understood since earliest times, the subtle aromas and flavours of whisky have never been fully explained, even today. The ancient term using beatha, which is Gaelic for the Latin aqua vitae or 'water of life', was corrupted in the 18'" century to usky, and then to whisky. The following description is a generalisation of the process.
It should be remembered that each distillery has its own unique specifications.

1. Malting

Best quality barley is first steeped in water and then spread out on malting floors to germinate. It is turned regularly to prevent the build up of heat. Traditionally, this was done by tossing the barley into the air with wooden shovels in a malt barn adjacent to the kiln.
During this process enzymes are activated which convert the starch into sugar when mashing takes place. After 6 to 7 days of germination the barley, now called green malt, goes to the kiln for drying. This halts the germination. The heat is kept below 70°C so that the enzymes are not destroyed. Peat may be added to the fire to impart flavour from the smoke.
2. Mashing

The dried malt is ground into a coarse flour or grist, which is mixed with hot water in the mash tun. The water is added in 3 stages and gets hotter at each stage, starting around 67°C and rising to almost boiling point.
The quality of the pure Scottish water is important. The mash is stirred, helping to convert the starches to sugar. After mashing, the sweet sugary liquid is known as wort. The spent grains - the draff - is processed into cattle feed.
3. Fermentation

The wort is cooled to 20°C and pumped into washbacks, where yeast is added and fermentation begins. The living yeast feeds on the sugars, producing alcohol and small quantities of other compounds known as congeners, which contribute to the flavour of the whisky. Carbon dioxide is also produced and the wash froths violently. Revolving switchers cut the head to prevent it overflowing. After about 2 days the fermentation dies down and the wash contains 6-8% alcohol by volume.
4. Pot Stills

In some mysterious way the shape of the pot still affects the character of the individual malt whisky, and each distillery keeps its stills exactly the same over the years.
In distillation, the still is heated to just below the boiling point of water and the alcohol and other compounds vaporize and pass over the neck of the still into either a condenser or a worm - a large copper coil immersed in cold running water where the vapour is condensed into a liquid.